Skip to main content

Orders - Redistribution

Written by Judi Zietsman


Navigate to: Settings > Configuration > Orders


Definition

The Redistribution settings control how stock is made available for redistribution between locations, how much inventory remains protected at source locations, and which constraints apply when creating redistribution orders.

These settings help balance stock availability across locations while reducing the risk of unnecessary replenishment or stockouts.

Use case

Configure these settings according to your redistribution requirements:

  • Redistribution buffer: Controls how much additional stock is retained at source locations before inventory becomes available for general redistribution.

  • Safety stock protection: Determines the percentage of safety stock protected when additional inventory is released to resolve stockouts.

  • Minimum stockout duration: Prevents redistribution for stockout periods too short to justify a transfer.

  • Default lead time: Sets the standard lead time for redistribution orders between locations.

  • Use minimum order quantity: Applies minimum order quantity constraints to outbound redistribution orders.

  • Use order multiple: Ensures redistribution quantities comply with order multiple constraints.

  • Distribute new items: Allows items with a New status to be redistributed to other locations.

Explanation

Redistribution buffer

Specifies the additional period of demand, measured in days, that must be retained at a source location before stock becomes available for general redistribution.

The app considers safety stock, replenishment cycle demand, and the redistribution buffer when determining how much stock can be released.

  • Higher value: Retains more stock at the source location, reducing the likelihood of needing replenishment shortly after redistribution.

  • Lower value: Makes more stock available for redistribution but increases the likelihood of subsequent replenishment.

💡 Tip: A shorter buffer can help redistribute excess more quickly, while a longer buffer provides greater protection for source locations.

Safety stock protection

Specifies the percentage of safety stock that must remain protected when additional stock is released to resolve stockouts.

  • 100% (default): All safety stock remains protected. When the stockout-resolution toggle is enabled, additional stock above safety stock, including cycle stock, can be considered for redistribution.

  • Below 100%: A smaller portion of safety stock remains protected, allowing more inventory to be considered for redistribution.

Example:

An item has a safety stock requirement of 4 units.

With Safety stock protection set to 50%:

  • Protected safety stock: 2 units

  • Unprotected safety stock: 2 units

When the stockout-resolution toggle is enabled, the app can consider releasing stock above the 2 protected units to help resolve shortages at other locations.

Excess stock is prioritized first, followed by healthy stock if urgent stockouts remain unresolved. Recommendations never reduce the source location's projected stock below zero within its lead time.

Minimum stockout duration

Specifies the minimum duration, in days, that a stockout must last before redistribution is considered to resolve that shortage.

This prevents transfers from being recommended for stockouts that are expected to end before the transferred stock can arrive.

Example:

If a stockout is expected to last 3 days but the transfer lead time is 7 days, redistribution would arrive too late to resolve the shortage.

💡 Tip: Set this value longer than your typical transfer lead time to avoid unnecessary transfers.

Default lead time

Specifies the default number of days required to transfer stock between locations.

The app uses this value when generating redistribution orders, but lead times can be overridden for individual source and destination location pairs when creating an order.

Use minimum order quantity

When enabled, outbound redistribution orders must comply with the minimum order quantity (MOQ) specified at the source location.

If insufficient stock is available to satisfy the MOQ, no redistribution quantity is recommended for that requirement.

Use order multiple

When enabled, outbound redistribution quantities must comply with the order multiple specified at the source location.

Quantities are adjusted to valid multiples, subject to available stock and any applicable minimum order quantity.

Note: If only an order multiple is specified, it also acts as the minimum order quantity.

Distribute new items

When enabled, products with a New status can be considered for redistribution to other locations.

These items must still meet the normal availability and requirement conditions for a redistribution order.


Forget about these 👇 😞 😐 😃 Have your say here!

Did this answer your question?